The construction of a specific system depends directly on the requirements of the user. PremiumVolt in the base performance is equipped with one or more Invertors OutBack Power, battery batteries, computer controller and installation elements. PracticVolt systems have a simpler set and consist of Victron Energy invertors and reservoirs. At the request of the customer, battery controllers may be added to the base assembly to monitor the ACB, battery counters and other devices.

High-tech single-phase or three-phase electrical systems that can operate from batteries without feeding from the network are developed from components, without requiring maintenance, consumable materials and fuel refuelling. The specific time of self-employment is determined by the energy intensity of the facility and the number of batteries.

All OutBack Power models shall be guaranteed up to five years, Victron Energy devices up to two, subject to installation and use regulations. Invertors declared by the manufacturer are 25 years old and for special batteries 10-12 years. Accumulative batteries after the end of the year shall be replaced.

Operating principle of the energy supply system

When the power grid voltage falls, the energy concentrated in the reservoirs shall be converted by an invertor to a clean sinus voltage of 220 V and a frequency of 50 Hz, optimistic for the most demanding electronic devices, appliances and special equipment.

The switch to power from the batteries is automatic for 16 to 20 ms, so all devices are still in operation. The charger shall automatically start charging the battery when the voltage on the network is injected into the IBP inverter.

The multifunctional OutBack Power and Victron Energy models can add power from the batteries to the power of the network, run the ball/engine generator, and connect in parallel to the power build.

Invertor systems with hybrid inverters OutBack or Victron can use multiple sources of energy from which the base is power grid and the additional generator. Alternative sources, such as solar panels and wind generators, may also be joined. At the same time, the data infrastructures of the invertors allow for the priority use of an alternative source and the network will be automatically connected only if necessary.